1.00 4926 28′ enclosed car trailer
1.00 Tandem axle 7.0K rubber torsion. Includes (4) GY tire/rim ST235/80R16 LRE & 8 hole silver aluminum wheel. (Includes conspicuity tape) (To add a spare use code 91169)
1.00 Axle lube type – easy lube
1.00 Carrier spare tire for bumper pulls mounted inside low on front wall
(Change to code 98092 if a higher mounting position is desired)
1.00 Coupler 2 5/16″ 21K drag
1.00 Jack crank type with wheel
1.00 Electric brake
1.00 Light LED rectangle surface mount 4.5″ x 2.5″ x 1″, 12 volts DC, 0.65
amps, 7.8 watts, 810 lumens without switch (Maximum 6 lights per 5 amp circuit) (Maximum 9 lights per 7.5 amp circuit) (Maximum 12 lights per 10 amp circuit) (Maximum 18 lights per 15 amp circuit) (Maximum 24 lights per 20 amp circuit)
1.00 Switch in dressing room
1.00 Light package for drag trailers with colored LED lenses (Includes (13) 3/4″
round clearance lights & 4 stop/turn lights) 28.00 Floor smooth extruded aluminum
1.00 Ramp rear full height and width with cable assist, pressure latches, treadplate, and vinyl hinge covers
1.00 Door camper deluxe 36″wide without window and with deadbolt and screen door
1.00 No door above fender
1.00 Car hauler platform standard height for car hauler with 2″ beavertail 1.00 Aluminum front sheets – drag only
1.00 Aluminum 12″ radius – drag v nose only
1.00 Beaver tail (If deleted, rear opening height will be reduced)
1.00 Aero nose – car/drag trailers
66.00 .040 aluminum exterior sheets taped with riveted seams
1.00 No winch box
1.00 No ramp extension
1.00 Coupler 2 5/16″ 14K adjustable height (Drag trailers with A-frames) 2.00 Light dock LED, surface mount, 8″ X4″ oval, 12 volts DC, 0.6 amps, 7.2
watts, 60 degree spot from mounting surface, 660 lumens (maximum 13 lights per 10 amp circuit) (maximum 20 lights per 15 amp circuit) (maximum 26 lights per 20 amp circuit)
28.00 Floor plywood 3/4″ per foot (Includes paint)
1.00 Door camper 36″ HD 2″ double sealed on curbside
1.00 Rear ramp full height and width 2″ thick with furgo car handles, cable
assist and treadplate and vinyl hinge covers 2.00 Reinforce only for A/C
28.00 Add 30″ to height of car trailer p/ft of trailer (May need to change side sheets)
1.00 Nose flat with radius corners (drag trailers) (Add text note if square
corners are preferred instead)
66.00 Side sheets .063 aluminum formed with minimum fasteners (9′ – 10′ tall)
per foot of wall (White only)
1.00 Skid rollers with skid plate (per pair)
28.00 False floor (second floor) aluminum 2 x 2 x 12″ centers per foot FRAME ONLY (Must add appropriate flooring code for covering frame-94370 (treadplate) and 94383- (.125 smooth) are common)
32.00 Roofrail painted only per foot (Black or White only) WHITE
1.00 SPREAD AXLE DESIGN
1.00 REVERSE TAIL FOR INCREASED GROUND CLEARANCE AT REAR
OF TRAILER
1.00 UPGRADE TO 2″ WALL POSTS
4.00 44″ x 18″ HD 2″ DOUBLE SEALED BAGGAGE DOOR