Custom Display Trailer Description

The Custom Display Trailer by Renegade is ideal for mobile tours or trades show activations.  Fully expanded the trailer can still fit into a 40′ x 20′ footprint.  That’s saying a lot since this trailer boasts dual slide outs on the driver’s side as well as an 8′ x 16′ stage on the passenger’s side.  If you have the headroom there is also a rooftop deck complete with rails that can work as additional signage or a full 360 degree marquee.

This trailer has everything.  The dual slide outs create two display areas inside the trailer with 3′ deep counters leaving plenty of room on the interior for consumers.  There are 3  exterior crowd facing monitors in custom shadowboxes for easy deployment.  Two monitors on the rear and one on the show side.  (55″ LCD Displays).  The large front stage that has two stair cases, one on each side, to create traffic flow.  Additionally there is a small lift gate on the rear that can be used for loading and unloading displays to ground level.  Finally there is a electric awning to cover the stage.

The detail of this trailer is impressive top to bottom.  The rooftop deck has 6 roof mounted heavy duty pedestal mounts.  There is a third small slide out in the nose for the kitchen area that includes sink, refrigerator and microwave.  The nose also houses interior stairs to the rooftop deck.  The trailer has custom skirting for the stage . Even the belly boxes have lighting.

This trailer is equipped with air ride and is currently registered as an RV.  The trailer is setup for fifth wheel towing.

Custom Display Trailer Drawing

custom display trailer towing